Jump to content

Barrel of oil equivalent

From Wikipedia, the free encyclopedia
(Redirected from Barrel Of Oil Equivalent)

The barrel of oil equivalent (BOE) is a unit of energy based on the approximate energy released by burning one barrel (42 US gallons, 35 imp gal or about 159 litres) of crude oil. The BOE is used by oil and gas companies in their financial statements as a way of combining oil and natural gas reserves and production into a single measure, although this energy equivalence does not take into account the lower financial value of energy in the form of gas.

The U.S. Internal Revenue Service defines a BOE as equal to 5.8 million BTU.[1] (5.8×10^6 BTU59°F equals 6.1178632×109 J, about 6.1 GJ [HHV], or about 1.7 MWh.) The value is necessarily approximate as various grades of oil and gas have slightly different heating values. If one considers the lower heating value instead of the higher heating value, the value for one BOE would be approximately 5.4 GJ (see tonne of oil equivalent). Typically 5,800 cubic feet of natural gas or 58 CCF are equivalent to one BOE. The USGS gives a figure of 6,000 cubic feet (170 cubic metres) of typical natural gas.[2]

A commonly used multiple of the BOE is the kilo barrel of oil equivalent (kboe or kBOE), which is 1,000 BOE. This should be avoided because it might lead to the use of MBOE (mega barrel of oil equivalent) but MBOE actually means thousand BOE. This potential confusion arises due to the use of Roman numeral M (one thousand) for natural gas production and MM (one million, even though MM means two thousand). In the S.I. (metric system) M means million, but cubic feet and barrels are not S.I. units, so S.I. prefixes should not be used. Another commonly used multiple is million barrels equivalent per day, MMboed (or MMBOED, MMboepd, where MM denotes a million), used to measure daily production and consumption,[3] and the BBOe (also BBOE) or billion barrels of oil equivalent, representing 109 barrels of oil, used to measure petroleum reserves.[4]

Metric regions commonly use the tonne of oil equivalent (toe), or more often million toe (Mtoe). Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl). The United States EIA suggests 1 toe has an average energy value of 39.68 million British thermal units (41.9 GJ).[5]

See also

[edit]

References

[edit]